AllerAir 6000 W Vocarb Air Purifier

The 6000 W is a source capture unit designed to trap chemicals, gases, and odors before they become airborne. Its convenient flex hose is adaptable to various positions, and is ideal for hard-to-reach places, where pollutants are emitted. The unit features 24 pounds of activated carbon, in combination with a high-performance HEPA filter for additional particle filtration.

Air Flow and Your AllerAir Air Purifier: We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:

Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.

Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.

Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!

Product Overview & Specs

The 6000 W is a source capture unit designed to trap chemicals, gases, and odors before they become airborne. Its convenient flex hose is adaptable to various positions, and is ideal for hard-to-reach places, where pollutants are emitted. The unit features 24 pounds of activated carbon, in combination with a high-performance HEPA filter for additional particle filtration.

Air Flow and Your AllerAir Air Purifier: We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:

Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.

Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.

Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!

• Filtration System: 24 lb. carbon filter, 2.5 in. depth, medical-grade HEPA, pre-filter
• Carbon Weight: 24 lbs.
• Surface Area of Carbon Media: 3000 acres
• HEPA: Medical-grade, removes 99.97% of all airborne particles 0.3 microns in size
• Surface Area of HEPA Media: 6416 sq. in.
• Micro-HEPA: Not Applicable
• CFM: 400
• Speed: 3-Speed
• Available Colors: Black, Sandstone, White
• Voltage: 115/60Hz or 230/50Hz
• Amps (115V/230V): 1.3/0.5
• Cord Length: 8 feet
• Noise Level: 50-75 dB
• Maneuverability: 4 x 2 in. wheels
• Filter Access: Pre-filter bottom no tools, Main filters bottom with screws
• Motor Details: Motor with a blower wheel
• Dimensions: 23.5 in. (height) x 15 in. (diameter)
• Shipping Weight: Approx. 62 lbs. in 2 Boxes
• Operating Weight: 56 lbs.
• Number of Units per Pallet: Multiple
• CSA/UL: Yes

A lower price may be available

When exactly will it arrive? Will I be able to assemble it? Do you have any coupons? Do you have any refurbished units? Help! I'm confused.